Listener Questions Part 2
Mike VA3MW and Smitty KR6ZY are back to continue answering YOUR Amateur Radio questions!
Our Website - http://www.hamradioworkbench.com/
Follow us on Twitter -https://twitter.com/hamworkbench
Contact us -http://hamradioworkbench.com/contact
Connect with us on Facebook - https://www.facebook.com/groups/hamradioworkbench/
BrandMeister Talkgroup 31075 - https://hose.brandmeister.network/group/31075/
Tripod for IC-705 - https://www.amazon.com/gp/product/B076F4ZTW9/ref=ppx_yo_dt_b_asin_title_o09_s01?ie=UTF8&psc=1
Z type tilt stand - https://www.amazon.com/gp/product/B07P4LX3RF/ref=ppx_yo_dt_b_asin_title_o09_s02?ie=UTF8&psc=1
Tenba BYOB 9 Slim Backpack Insert - https://www.amazon.com/gp/product/B076446F6D/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
MX-P50M Amplifier - https://www.ebay.com/itm/45W-MX-P50M-HF-Power-Amplifier-for-FT-817-ICOM-IC-703-Elecraft-KX3-QRP-FT-818/223997697007?hash=item34274d9bef:g:S2MAAOSw6WlerpH~
Bioenno 6Ah battery - https://www.bioennopower.com/collections/12v-series-lifepo4-batteries/products/12v-6ah-lfp-battery-black-w-pvc-pack
Battery charger - https://www.bioennopower.com/products/14-6vdc-2a-ac-to-dc-charger-dc-plug-for-lifepo4-batteries
QSO Today PackTenna presentation - https://www.youtube.com/watch?v=tnx_DXFHNcU
Under Desk Cable Management - https://www.amazon.com/Under-Desk-Cable-Management-Tray/dp/B07HMXBSLW/ref=sxin_9
Bioenno 12V Car Battery Charger - https://www.bioennopower.com/collections/8-ac-to-dc-chargers-accessories/products/14-6v-3a-car-charger-for-12v-lifepo4-batteries-bpc-1503car
If you want to build your own LC meter, here is one using a PIC and 16x2 display, It is based on the AADE unit that is no longer available (though the clones are on eBay probably).
Where is that WSPR $30 transmitter you where talking about? I'd listen to the podcast again but it was 2+ hours LOL :)
There are two that might be what you're talking about. The one I use is the Ultimate 3 from QRP Labs: https://www.qrp-labs.com/ultimate3/u3s.html
What was the URL of the site you mentioned near the end with plans for a diy az-el rotator made from 80-20 extrusions and 3d printed parts?
Guys....I really, really like the round robin answering of lister questions from a practical engineering standpoint. Every comment mentioned has you now thinking of critical elements to consider from the show hosts experience and perspective. Because each of you has very different experience levels, it covers a very broad area of things to consider that would be impossible for one person to have alone. Its one of my favorite episodes so far (Genasun was the best IMO).
Leave a Reply.