Ham Radio Workbench Podcast
  • HOME
  • Podcast
  • Projects
    • DC Power Strip >
      • DC Power Strip Assembly
    • BenchDuino >
      • BenchDuino Builder's Notes
    • K6BEZ Antenna Analyzer
    • 4-Port Coax Relay
    • QRP Smarty Load
    • QRP Dummy Load
  • Articles
  • Blogs
  • Shop
  • Resources
  • INDEX
  • About
  • Contact
  • HOME
  • Podcast
  • Projects
    • DC Power Strip >
      • DC Power Strip Assembly
    • BenchDuino >
      • BenchDuino Builder's Notes
    • K6BEZ Antenna Analyzer
    • 4-Port Coax Relay
    • QRP Smarty Load
    • QRP Dummy Load
  • Articles
  • Blogs
  • Shop
  • Resources
  • INDEX
  • About
  • Contact

​Ham Radio Workbench build projects

CURRENT BUILD PROJECTS

Picture


5 Port 12 Volt DC PowerPole Outlet Strip Kit

Part Number:  HRWB101

​​Provides 1 input and 5 outputs.  Uses standard Anderson PowerPole connectors widely used in amateur radio.  The outlet strip is rated for a maximum of 20 amps at 12 VDC.
The input and every output is individually fused and the built in LED indicates when external power is applied.
Requires basic assembly skills and hand tools.
We highly recommend a high power soldering iron with a wide chisel tip.

Product details, assembly instructions and other resources.

RETIRED BUILD PROJECTS

These products, boards and kits are not currently available.  These links contain design details and technical resources.

BenchDuino Microcontroller Project Development Board Set

Picture

BenchDuino 
Microcontroller Project Development Board

Project details, documentation and resources
Picture

K6BEZ Antenna Analyzer

Project details, documentation and resources
Picture

KJ6VU  4 Port HF Coax Relay Board

Project details, documentation and resources
Picture

Smarty Load

​Project details, documentation and resources
Picture

QRP Dummy Load

Project details, documentation and resources
Brandmeister Talkgroup 31075
©2016-2020 Ham Radio Workbench, All Rights Reserved
Connect on Brandmeister Talkgroup 31075