This week George and Smitty spend time with Derek Kozel K0ZEL talking about the GNU Radio project.
PERMALINK - https://www.hamradioworkbench.com/podcast/GNU-Radio Our Website - http://www.hamradioworkbench.com/ Follow us on Twitter - https://twitter.com/hamworkbench Contact us - http://hamradioworkbench.com/contact Connect with us on Facebook - https://www.facebook.com/groups/hamradioworkbench/ BrandMeister Talkgroup 31075 - https://hose.brandmeister.network/group/31075/ mcHF QRP Transceiver - by Chris M0NKA - http://www.m0nka.co.uk/ RemoteRig setup with TM-D710G for the Cardiff University Amateur Radio Society - GC0CDF - https://cardiffars.org.uk Double Delta Skeleton Slot, analysis. Data posted - https://github.com/SmittyHalibut/DoubleDeltaSlotAntenna George’s Blog - https://www.hamradioworkbench.com/george-kj6vus-blog.html GNU Radio - https://www.gnuradio.org/ GNU Radio Tutorials for SSB receiver - https://wiki.gnuradio.org/index.php/Simulation_example:_Single_Sideband_transceiver PySDR - https://pysdr.org/ PlutoSDR: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/adalm-pluto.html HackRF - https://greatscottgadgets.com/hackrf/one/ SDRPlay - https://www.sdrplay.com/
3 Comments
Brian KI7LKB
12/4/2020 23:43:59
In the amateur home built aircraft community, we typically try to embed com and nav antennas in the composite aircraft structure to reduce aerodynamic antenna drag. However, we learned that this does not work on carbon fiber airframes, for the same reasons George discovered with the carbon antenna mast.
Joshua Higgins
12/7/2020 20:06:16
In this episode it was made mention of a cheap SDR radio for $10 or $15 or even splurge and get the $20 with the metal case. Which radio was that again? Which link is for that one?
Steve
12/27/2020 15:37:27
NooElec makes several available on Amazon (I am not an affiliate: I get squat when you buy) Leave a Reply. |
SubscribeArchives
October 2020
Categories
All
|
RSS Feed
