Ham Radio Workbench Podcast
  • QTH
  • Podcast
  • Articles
  • Projects
    • BenchDuino >
      • BenchDuino Builder's Notes
    • 4-Port Coax Relay
    • 12V DC Power Strip
    • QRP Dummy Load
    • QRP Smarty Load
    • K6BEZ Antenna Analyzer
  • Shop
  • Blogs
    • George KJ6VU's Blog
    • Brittany KF8IJZ's Blog
  • About
  • Contact
  • QTH
  • Podcast
  • Articles
  • Projects
    • BenchDuino >
      • BenchDuino Builder's Notes
    • 4-Port Coax Relay
    • 12V DC Power Strip
    • QRP Dummy Load
    • QRP Smarty Load
    • K6BEZ Antenna Analyzer
  • Shop
  • Blogs
    • George KJ6VU's Blog
    • Brittany KF8IJZ's Blog
  • About
  • Contact

Ham Radio Workbench Blog

Introducing the Hytera AR482G DMR Radio

5/30/2018

13 Comments

 
Hytera launched a new commercial quality DMR HT aimed at the amateur market at the 2018 Hamvention.  The AR482G is a UHF 4W DMR HT with the inklings of some ham friendly features with promises of more to come in the future.  KF7IJZ has done an in-depth overview of the radio covering its features and its opportunities.

This radio is exclusively available from Ham Radio Outlet.

​
To hear more about this radio and Hytera's plans for the Amateur market, check out our 2018 Hamvention Interview episode.
13 Comments
Michael Murphy link
7/2/2018 12:25:15

Jeremy,

Any significant firmware updates for the Hytera yet?

Reply
KF7IJZ
7/2/2018 19:50:35

Not as of yet - I will reach out to them and see what's going on!

Reply
Michael Murphy link
7/21/2018 14:58:32

Jeremy,

Now that Hytera has lost in court to Motorola, any idea if this HT will still be available?

Reply
Gerard randall
8/27/2019 20:40:31

Wll updated software hardware be avaible for existing ar482g radios

Reply
Dennis Pennington
9/20/2019 11:26:26

Does anyone know where I can download the programming software for the AR482G ? HRO doesn't have it anymore.

Reply
George Zafiropoulos
9/20/2019 12:26:12

Hi Dennis
Send me your email and I can help you out.
George

Reply
Dennis Pennington
9/20/2019 13:51:55

Thanks

Fred
10/5/2019 01:47:55

I'm looking for AR482G CPS also, Please....

Brett
10/7/2019 12:48:03

Could you please send me the software for the AR482G?

bs
11/4/2019 09:20:30

I'm also looking for the CPS for the AR482G. Thanks.

Dennis Pennington
11/23/2019 11:08:57

Please send link to the software.
73
Dennis

Joe Grib link
11/29/2019 18:56:30

Hi, I need the software also for programming this radio. Thanks.... Joe KI3B

Dennis Pennington
11/29/2019 23:16:05

George , never did get the software.
Thanks
Dennis




Leave a Reply.

    Archives

    December 2018
    May 2018

    Categories

    All

    RSS Feed

Brandmeister Talkgroup 31075
©2016-2020 Ham Radio Workbench, All Rights Reserved
Connect on Brandmeister Talkgroup 31075